KM MUGHAL Model P2 – Industrial Hydraulic Paver Block Machine & Concrete Plant

When your business demand goes beyond what a basic machine can handle, it is time to step up to a proper industrial setup. The KM MUGHAL Model P2 is a full-scale hydraulic paver block machine built for factories, large contractors, and serious construction supply businesses that need consistent, high-volume output every single day.

With a total power of 77.5 HP and a complete plant configuration that includes a mixer, conveyor belt, chain conveyor, and electrical control panel, the P2 is not just a machine – it is an entire production line in one package. It can push out up to 15,000 paver tiles in a single 8-hour shift, along with solid blocks and kerbstones depending on which mold is running.

If you are serious about building a profitable concrete products business in Pakistan, this is the machine that delivers the numbers.

Full Machine Specifications

Daily Production Capacity – What P2 Can Deliver

This is where the P2 stands out. Unlike semi-manual machines that depend on worker speed, the hydraulic system of P2 keeps every cycle consistent – same pressure, same compaction, same quality – batch after batch.

Even at the lower end – 9,000 tiles per shift – this machine produces more in one day than many small factories produce in a week.

What Makes P2 Different From Entry-Level Machines?

There is a real difference between a basic vibration-based machine and a full hydraulic block plant. Here is what that difference actually means in practice:

Hydraulic Compression vs. Vibration Only

Entry-level machines rely mostly on vibration to compact concrete into molds. The P2 uses hydraulic pressure combined with vibration, which means every block and tile is compacted with consistent downward force. The result is a denser, stronger, more uniform product that holds its shape better during stacking, transport, and laying.

Complete Plant in One System

The P2 comes with a dedicated mixer (20 HP), conveyor belt, and chain conveyor as part of the setup. You are not buying a press and then separately figuring out how to feed concrete into it. The entire production flow – mixing, feeding, pressing, and moving finished products – is designed to work together. This reduces manual handling, speeds up the cycle, and cuts down on errors.

Electrical Panel Control System

The P2 is controlled through a centralized electrical panel, which means all major operations are managed from one point. Workers do not need to move around between different parts of the machine for controls. This simplifies operation and reduces the chance of mistakes during high-volume runs.

Lever-Operated Hydraulic System – Reliable and Repairable

The hydraulic operation uses a lever-based system, which is both simple to use and easy to service. Unlike fully computerized PLC systems that require specialized technicians for any repair, the P2’s hydraulic and mechanical components can be maintained and serviced locally, keeping your downtime and repair costs low.

Products You Can Manufacture With P2

The P2 supports a wide range of products through mold changes. One machine covers your entire concrete products catalog:

• Rectangle paver tiles – most common for roads, footpaths, plazas
• I-shape interlocking pavers – for driveways, commercial areas, car parks
• Uni-block pavers – for mixed use outdoor surfaces
• Solid concrete blocks – for walls, boundary structures, commercial construction
• Kerbstones – for road edges, drainage channels, municipality work
• Hollow blocks – with compatible molds (available separately)

Switching between product types requires a mold change, which takes a short time and does not require specialized tools.

Who Should Buy the KM MUGHAL P2?

The P2 is not an entry-level machine – it is built for people who are ready to operate at a proper industrial scale. It is the right choice if you are:

• Running or starting a dedicated block and paver factory that needs to meet regular bulk orders
• A construction company that wants in-house tile and block production to stop depending on outside suppliers
• An investor or entrepreneur who wants to enter the concrete products market at a competitive production level
• A contractor working on large housing schemes, road projects, or commercial developments where you need your own supply chain
• Someone looking to export concrete products or supply to large government and infrastructure projects

If you are still at the beginning stages and need something smaller, the KM MUGHAL P1 is the right starting point. The P2 is for when volume is the priority.

Earnings Potential With P2

The numbers below are based on current Pakistan market rates and are meant as a general guide. Your actual earnings will depend on local pricing, raw material costs, and operating expenses.

Paver Tile Production (Rectangle, 15,000/day):

• Market selling price per tile: PKR 25–40
• Gross daily revenue: PKR 375,000 – 600,000
• Estimated raw material cost per tile: PKR 13–17
• Estimated daily operating profit: PKR 120,000 – 345,000

Solid Block Production (4,000 blocks/day):

• Market selling price per block: PKR 60–90
• Gross daily revenue: PKR 240,000 – 360,000
• Estimated raw material cost per block: PKR 30–40
• Estimated daily operating profit: PKR 80,000 – 200,000

These figures show why concrete product manufacturing – especially at P2 scale – is considered one of the stronger industrial business opportunities in Pakistan’s current construction market.

P2 vs P1 – Which One Is Right for You?

Both machines come from KM MUGHAL and share the same build quality standards. The difference is scale and system complexity.

Short answer: If you are producing for daily bulk orders or running a full factory, go with P2. If you are starting out or running a smaller setup, start with P1 and upgrade later.

Setup Requirements for P2

Before ordering, make sure your facility can accommodate the following:

• Power supply: 77.5 HP total draw – a stable industrial electricity connection or generator is required
• Floor space: Minimum 30×40 feet recommended to house the machine, mixing zone, conveyor path, and curing area
• Foundation: Concrete floor recommended to handle machine vibration during high-volume runs
• Pallets: Wooden pallets needed for tile transport and outdoor curing (available from KM MUGHAL)
• Raw materials: Standard Portland cement, coarse sand, crush aggregate, and water – all readily available across Pakistan
• Curing time: Finished products need 24–48 hours of water curing before they are ready for stacking or sale
• Workers: Typically 3–4 workers per shift for smooth operation of the full plant setup

Frequently Asked Questions

Q: What is the price of KM MUGHAL P2 in Pakistan? A: The P2 is listed as “call for price” – final pricing depends on your configuration, included accessories, and delivery location. Contact KM MUGHAL directly via WhatsApp or phone to get a quote tailored to your setup.

Q: Does P2 come with a mixer and conveyor included? A: Yes. The P2 is a complete plant setup that includes a 20 HP mixer machine, conveyor belt, chain conveyor, and electrical control panel as standard components.

Q: How many workers are needed to run P2? A: You typically need 3 to 4 workers per shift – one managing the mixing and feeding side, one operating the press, and one or two handling pallet stacking and product moving.

Q: What is the cycle time for P2? A: For paver tiles, each production cycle takes 25 to 30 seconds. For solid blocks and kerbstones, the cycle is 40 to 45 seconds due to the larger mold size.

Q: Can P2 produce kerbstones and solid blocks as well? A: Yes. With the appropriate mold, P2 can produce solid blocks, kerbstones, interlocking pavers, and various tile shapes. Mold changes are straightforward and do not require special tools.

Q: Is this machine suitable for export-level production? A: Yes. The P2’s output volume, product consistency, and hydraulic compaction make it suitable for businesses supplying large-scale projects or producing for export markets.

Q: What power connection does P2 require? A: The machine draws 77.5 HP in total. An industrial-grade electricity supply or suitably rated generator is required. Confirm with KM MUGHAL during your inquiry for exact electrical specifications.

Q: Is after-sales support available for P2? A: KM MUGHAL provides setup support, operational guidance, and spare parts. Their team is based in Lahore and can be reached via phone or WhatsApp for ongoing support.

How to Order or Request a Price Quote

Reach out to KM MUGHAL directly to get current pricing, delivery timelines, and any customization options:

• WhatsApp: +92 302-0424940
• Phone: +92 300 887 8807
• Address: Sanda Khurd, Main Bund Road, Lahore
• Email: info@km-mughal.com

Inquire about what is included in the standard P2 package, whether installation support is available in your area, and lead time for delivery.

Related Products and Accessories

Running a P2 setup? You may also need:

• Wooden Pallets for P2 – purpose-built for P2 block size and pallet flow
• Cement Silo – for bulk cement storage and automated feeding
• Aggregate Hopper / Feeding System – to reduce manual material handling
• Pan Concrete Mixer – backup or additional mixing capacity
• Paver and Block Molds – multiple shapes including zigzag, I-shape, cobblestone, kerb

Best Model P2 Concrete Manufacturer in Pakistan

KM MUGHAL has spent over two decades manufacturing construction machinery in Pakistan. The P2 model reflects that experience – it is built for people who are not just experimenting with block production but are committed to running a serious, profitable operation. From the hydraulic system that delivers consistent compaction to the full plant layout that minimizes manual work, every part of the P2 is designed around one goal: maximum output with minimum downtime.

If you are ready to run a block and paver factory at industrial scale, call or WhatsApp KM MUGHAL today to discuss pricing, delivery, and what configuration is right for your site.